Wacom IV and V Tablet driver

emi.sys contained in using it at Pen for OS/2 is required.

1.Install
(1) emi.sys contained in Pen for OS/2 is taken out.
(2) emi.sys and pendd.sys are copied to the directory of an installation place.
(3) The following two lines are added to config.sys.
    DEVICE=drive:\path\PENDD.SYS
    DEVICE=drive:\path\EMI.SYS
    Please describe these two lines before MOUSE.SYS.
    example)
      DEVICE=D:\TABLET\PENDD.SYS
      DEVICE=D:\TABLET\EMI.SYS
      DEVICE=D:\OS2\BOOT\MOUSE.SYS
(4) Reboot
(5) The program object of W1.exe and W2.exe is created.
(6) A tablet is connected.
(7) The created program object is started.
(8) A COM port and connection speed are set up and the Enable button is pushed.
    A tablet can be used if status changes green from red.

If /C /E is specified to be the parameter of a program object
and the shadow is put into the starting folder, a tablet can
be automatically used at the time of OS/2 starting.

2.Option
There are the following options in W1.exe.
(1) A pressure can be changed by Threshold of a General page.
    It is necessary to make it End Disable reflecting change.
(2) It can choose whether to use coordinates absolutely by
    the Absolute check box of a Cursor page at the time of
    mouse use, or to use relative coordinates.
    This will be immediately reflected, if a tablet changes
    at the time of Enable.
(3) Only 4D Mouse of Intuos of a Cursor page is effective.
(4) As for a Function page, only model i-600 of Intuos are effective.
    Since the coordinates of Function box are unknown, other
    models are not supported.

3.Parameter
(1)W1.exe
W1 [/C] [/E] [/P:{1..9}] [/S:{9600|19200|38400}]

[] Inside is omissible.
{} It is necessary to specify any one.

/C It minimizes and starts.
/E It connects with a tablet at the time of starting.
/P: The COM port number to connect is specified.
    The value specified last time at the time of an end is
    used at the time of an abbreviation.
/S: Connection speed is specified.
    The value specified last time at the time of an end is
    used at the time of an abbreviation.

(2)W2.exe
W2 [/E] [/P:{1..9}] [/S:{9600|19200|38400}] [/A] [/T:{0..100}] [/I:{0..100}]

[] Inside is omissible.
{} It is necessary to specify any one.

/E It connects with a tablet at the time of starting.
/P: The COM port number to connect is specified.
/S: Connection speed is specified.
/A: It always displays on a forefront side.
/T: The threshold of a pen set up. (Default 3)
/I: Display position (the x-coordinate from a left end is
    specified at percent.) Default 13

4.Notes
(1) When PEN and CURSOR were placed on the tablet, and were
    left for a while and PEN and CURSOR are moved again, a
    mouse cursor may not move.
    In this case, please raise PEN and CURSOR upwards.

5.Other
(1) The tablet which is carrying out the check of operation
    on our side is the following 2 models.
    GD-0608-R00,V1.2-7
    KT-0405-R00 V1.3-3
    Although it thinks that this driver can be used by the
    tablet which is using the protocol of Wacom IV and 
    Wacom V, those who are referred to as having operated
    from models other than this need to teach a part number
    and size.
    A part number and size are displayed on a General page.

===================================================================
masami@1drop.net
