
		CD55A OS/2 Device Driver version beta
		 Installation Procedure


The TEACCD1.ADD file should be added to the OS/2 2.1 CONFIG.SYS file. 
The following OS/2 files should also be added to the CONFIG.SYS file.


If you have previously installed OS/2,

    1.  Make sure you have the following line in your CONFIG.SYS file. If the 
	line is missing, add it to your CONFIG.SYS file.

	DEVICE=C:\OS2\CDFS.IFS /Q

    2.  Make sure you have the following line in your CONFIG.SYS file. If the 
	line is missing, add it to your CONFIG.SYS file.

	IFS=C:\OS2\CDFS.IFS /Q

    3.  The OS/2 CD-ROM device driver must be disabled. Remark the following 
	line in your CONFIG.SYS file.

	REM DEVICE=C:\OS2\CDROM.SYS /Q /N:4

    4.  Copy the TEACCD1.ADD file to C:\OS2

	COPY X:\TEACCD1.ADD C:\OS2 [Enter]

    5.  Add the following line to your CONFIG.SYS file.

	BASEDEV=TEACCD1.ADD /P:xxx /S:x /I:x /T:x

	/P:xxx  - Port address (220, 240, 260, 280, 300, 320 or 340H etc.)
	/S:x    - CD-ROM fixed speed (1, 2 or 4). Omit this switch for auto 
		  speed setting.
	/I:x    - Power Save time : H=30 sec, M=60 sec or L=80 sec. Omit 
		  this switch for default power save time of 360 sec.
	/T:x    - Host interface type : 0=Sound Blaster, 1=TEAC I/F card 
		  or 2=Sound Blaster Compatible.

    6.  Copy the OS2CDROM.DMD file from the OS2CDR package to C:\OS2.

	COPY X:\OS2CDROM.DMD C:\OS2 [Enter]

    7.  Add the following line to your CONFIG.SYS file.

	DEVICE=C:\OS2\OS2CDROM.DMD /Q

	Then reboot the system so that these changes can take effect.


Creating an OS/2 environment for installation from a CD-ROM disk.

    1.  Create two disks using INSTALL.BAT or INSTALL.CMD that came with 
	the OS/2 ver. 2.1 CD-ROM.

    2.  Copy the TEACCD1.ADD file into the second disk created in step 1 
	above. If there isn't enough disk space, remove any .ADD files that 
	will not be used.

    3.  Add the following line to the CONFIG.SYS file on the second disk 
	created in step 1 above.

	BASEDEV=TEACCD1.ADD /P:xxx /S:x /I:x /T:x

	/P:xxx  - Port address (220, 240, 260, 280, 300, 320 or 340H etc.)
	/S:x    - CD-ROM fixed speed (1, 2 or 4). Omit this switch for auto 
		  speed setting.
	/I:x    - Power Save time : H=30 sec, M=60 sec or L=80 sec. Omit 
		  this switch for default power save time of 360 sec.
	/T:x    - Host interface type : 0=Sound Blaster, 1=TEAC I/F card 
		  or 2=Sound Blaster Compatible.

    4.  Continue to install OS/2 as normal.


	If you have any questions please call (213) 727 - 4860 for 
	TECHNICAL SUPPORT.
